L_Digitallogic_1 - Lenze 8400 StateLine C Reference Manual

16.1.16

L_DigitalLogic_1

This FB provides a binary output signal created by a logic operation of the input signals.
Optionally, one of the constant binary values independent from the input signals can be
output.
 Output of a constant binary value
 Logical ANDing of the inputs
 Logical ORing of the inputs
 Output depending on the combination of the input signals
Inputs
Identifier
bIn1
bIn2
bIn3
Outputs
Identifier
bOut
Firmware ≤ 11.00 - DMS 8.0 EN - 10/2011
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Information/possible settings
Data type
Input signal 1
BOOL
Input signal 2
BOOL
Input signal 3
BOOL
Value/meaning
Data type
Output signal
BOOL
L
8400 StateLine C | Reference manual
Function blocks | L_DigitalLogic_1
Function library
797