File Logbook In Project - Lenze 8400 StateLine C Reference Manual

9.5.5

File logbook in project

If you want to display the currently available logbook entries at a later date in offline mode,
i.e. without a connection to the controller, you can file the current logbook in the project.

How to file the logbook in the project:
Go to the Logbook dialog box and click the File in project button.
 The logbook with all the entries uploaded up to now is filed in the Engineer project
independent of the set filter criteria.
 A logbook of the same device already filed before will be overwritten without querying
the user.
 The filter settings are not filed in the project.
 When a logbook is filed in the project, the logbook can also be opened in offline mode
via the Logbook button on the Diagnostics tab.

Note!
Filing the logbook changes the project.
• When the project is closed, you are asked to save the changed project.
• Only if the changed project is saved, the new logbook entries filed in the
project remain stored.
Firmware ≤ 11.00 - DMS 8.0 EN - 10/2011
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
8400 StateLine C | Reference manual
Diagnostics & error management
L
Logbook
393