8400 StateLine C | Reference manual
Motor control (MCTRL)
V/f characteristic control (VFCplus)
5.4.2
Basic settings
The "Initial commissioning steps" listed in the table below are sufficient for a simple
characteristic control.
Detailed information on the individual steps can be found in the following
subchapters.
Initial commissioning steps
1.
Defining the V/f characteristic
2.
Defining current limits (Imax
Tip!
Information on the optimisation of the control mode and the adaptation to the
real application is provided in the chapter
Parameterisable additional functions are described correspondingly in the chapter
"Parameterisable additional
128
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
shape.
( 129)
controller).
( 130)
"Optimising the control
functions".
( 193)
L
mode".
Firmware ≤ 11.00 - DMS 8.0 EN - 10/2011
( 131)