Ls_Analoginput - Lenze 8400 StateLine C Reference Manual

16.2.1

LS_AnalogInput

Interface to the analog input terminals.

For a detailed description see the main chapter "I/O terminals":
Internal interfaces | System block "LS_AnalogInput"
16.2.2 LS_CANManagement
Control of internal functions of the CAN driver and display of the "Operational" status as
well as the node address.

For a detailed description see the main chapter "System bus CAN on board":
Internal interfaces | System block "LS_CANManagement"
16.2.3 LS_DataAccess
Only for Lenze-internal use.
16.2.4 LS_DeviceMonitor
Motor control status signals.

For a detailed description see the main chapter "Motor control (MCTRL)":
Internal status signals | system block "LS_DeviceMonitor"
16.2.5 LS_DigitalInput
Interface to the digital input terminals.

For a detailed description see the main chapter "I/O terminals":
Internal interfaces | System block "LS_DigitalInput"
16.2.6 LS_DigitalOutput
Interface to the digital output terminals.

For a detailed description see the main chapter "I/O terminals":
Internal interface | System block "LS_DigitalOutput"
Firmware ≤ 11.00 - DMS 8.0 EN - 10/2011
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
8400 StateLine C | Reference manual
L
Function library
System blocks | LS_AnalogInput
( 280)
( 499)
( 251)
( 266)
( 272)
857