Integrated Technology Applications - Lenze 8400 StateLine C Reference Manual

8400 StateLine C | Reference manual
Introduction: Parameterising the controller

Integrated technology applications

2.1 Integrated technology applications
The following technology applications in the 8400 StateLine controller provide the main
signal flow for the implementation of a general or special drive solution:

Note!
Please note that the StateLine, HighLine and TopLine device types differ with
regard to the number, functional range, and flexibility of the technology
applications offered.

Detailed information on each technology application can be found in the main
chapter entitled
28
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Technology application "Actuating drive speed"
This preset technology application serves to solve speed-controlled drive
tasks, e.g. conveyor drives (interconnected), extruders, test benches,
vibrators, travelling drives, presses, machining systems, metering units.
"Switch-off positioning" technology application
This technology application available
speed-controlled drive tasks for which a pre-switch off or stop at certain
positions is required, e.g. roller conveyors and conveying belts. The pre-switch
off is implemented by the connection of switch-off sensors.
"Technology
L
from version 04.00.00
applications".
( 289)
Firmware ≤ 11.00 - DMS 8.0 EN - 10/2011
serves to solve