Password Protection - Lenze 8400 StateLine C Reference Manual

2.4 Device access protection
This function extension is available from version 06.00.00!
Various tasks can be carried out via the functions of the device access protection:

Password protection


– Only authorised persons (who know the password) are permitted to read/change all
parameters of the controller.
– Unauthorised persons (who do not know the password) are only granted access to
the max. 32 parameters of the user menu.
Device personalisation

– Only controllers and memory modules which are personalised with a specific binding
ID can be used for the system.

Note!
If password protection/device personalisation is used:
• Let the end customer know that Lenze can only provide limited service in case
of devices with access protection.
• Lenze cannot modify e.g. a replacement device via special access to make it
work with a personalised memory module.
• The keypad does not support the alpha-numeric entry of a password, thus the
keypad cannot be used for entry.
Firmware ≤ 11.00 - DMS 8.0 EN - 10/2011
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
8400 StateLine C | Reference manual
Introduction: Parameterising the controller
L
Device access protection
41