Ls_Keypad - Lenze 8400 StateLine C Reference Manual

8400 StateLine C | Reference manual
Function library
System blocks | LS_Keypad
16.2.11

LS_Keypad

This system block is used on I/O interconnection level if the "Keypad" control mode has
been selected in C00007.
In the "Keypad" control mode, the LS_Keypad system block passes on various setpoints and
control commands to the technology application which can be selected/activated via
codes using the keypad.
Outputs
Identifier
bSetQuickstop
bSetDCBrake
nTorqueMotLim
nTorqueGenLim
bSetSpeedCcw
nMainSetValue
bJogSpeed1
bJogSpeed2
bMPotEnable
bMPotUp
bMPotDown
862
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Value/meaning
Data type
C00727/1 = "1" ≡ Request quick stop
BOOL
C00727/2 = "1" ≡ Request DC-injection braking
BOOL
Torque limit in motor mode set in
• Lenze setting: 100.00 %
INT
Torque limit in generator mode set in
• Lenze setting: 100.00 %
INT
C00727/3 = "1" ≡ Request reversal
BOOL
Setpoint speed set in C00728/3
• Lenze setting: 0.00 %
INT
C00727/4 = "1" ≡ Request fixed speed setpoint 1
BOOL
C00727/5 = "1" ≡ Request fixed speed setpoint 2
BOOL
C00727/6 = "1" ≡ Motor potentiometer: Request activation
BOOL
C00727/7 = "1" ≡ Motor potentiometer: Request positive acceleration
BOOL
C00727/8 = "1" ≡ Motor potentiometer: Request negative acceleration
BOOL
L
C00728/1
C00728/2
Firmware ≤ 11.00 - DMS 8.0 EN - 10/2011