Selecting A Motor From The Motor Catalogue In The "Engineer - Lenze 8400 StateLine C Reference Manual

8400 StateLine C | Reference manual
Motor control (MCTRL)
Motor selection/Motor data
Parameter
C00070
C00071
C00075
C00076
C00273
5.1.1 Selecting a motor from the motor catalogue in the »Engineer«
If a checkmark is set in the Motor control field in the "Other components" dialog when the
controller is inserted into the project, the motor for the controller can be selected from the
motor catalogue in another dialog:
 Alternatively, the motor can be inserted into the project at a later time via the Insert a
component command.
 Go to the Application parameters tab in the Overview  Motor data dialog level and
click the From motor catalogue... button to also reach the motor catalogue for the
selection of another motor.
110
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Info
SLVC: Vp speed controller
SLVC: Ti speed controller
Vp current controller
Ti current controller
Moment of inertia
L
ASM
Firmware ≤ 11.00 - DMS 8.0 EN - 10/2011
PSM