Firmwareupdate - Lenze 8400 StateLine C Reference Manual

 The change from one status to the other is carried out within a 1-ms cycle. If within this
time there are several requests for status changes, the status with the higher priority is
processed first (see table below).
C00137

C00150

via bits 8 ... 11 (see table below).
ID Device status
(Display in C00137)
0

FirmwareUpdate

1 Init
2 MotorIdent
3 ReadyToSwitchOn
4 SwitchedOn
5 OperationEnabled
6 -
7 Trouble
8 Fault
9 TroubleQSP
10 SafeTorqueOff
11 SystemFault
[4-1] Device states, priorities, and meaning of the status bits in the status word
4.2.1 FirmwareUpdate

Note!
This function may only be executed by qualified Lenze personnel!
Firmware ≤ 11.00 - DMS 8.0 EN - 10/2011
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
displays the current device status.
(status word) provides a bit coded representation of the current device status
Priority
-
-
-
Prio 5
Prio 4
Prio 1
-
Prio 3
Prio 7
Prio 2
Prio 6
Prio 8
L
8400 StateLine C | Reference manual
Device state machine and device statuses
Status bits
(Display in C00150)
Bit 11 Bit 10 Bit 9 Bit 8
0 0 0 0
0 0 0 1
0 0 1 0
0 0 1 1
0 1 0 0
0 1 0 1
0 1 1 0
0 1 1 1
1 0 0 0
1 0 0 1
1 0 1 0
1 0 1 1
Device control (DCTRL)
Meaning
Firmware update function is active
Initialisation is active
Motor parameter identification is
active
Device is ready to start
Device is switched on
Operation
-
Trouble is active
Fault is active
TroubleQSP is active
Safe torque off is active
System fault is active
87