Keyboard Commands For Navigation - Lenze 8400 StateLine C Reference Manual

8400 StateLine C | Reference manual
Working with the FB Editor
Using the FB Editor as "Viewer"

How to navigate from one input to another connected output:
If the input is connected to a flag:
• Double-click the flag:
If the input is connected to a line:
1. Open the context menu (right mouse button) of the port symbol at the output:
2. Select output in the context menu.
• Since an output can only be connected to an input, the context menu contains
only an output.
The output is displayed in the centre of the drawing area.
15.3.2

Keyboard commands for navigation

Keyboard command
<Picture >
<Picture >
<Shift> + <picture
<Shift> + <picture
<POS1>
<END>
<Ctrl> + <Pos1>
<Ctrl> + <End>
738
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Function
Scroll up
Scroll down
Scroll to the left
>
Scroll to the right
>
Scroll to the left edge of the interconnection
Scroll to the right edge of the interconnection
Scroll to the left upper corner of the interconnection
Scroll to the right lower corner of the interconnection
L
Firmware ≤ 11.00 - DMS 8.0 EN - 10/2011