Reading Out Logbook Entries - Lenze 8400 StateLine C Reference Manual

9.5.3

Reading out logbook entries

With an online connection, the existing logbook entries can easily be displayed in the
»Engineer«. Alternatively, the logbook entries can also be read out via the corresponding
parameters (e.g. using the keypad).

How to display logbook entries in the »Engineer«:
1. Select the 8400 StateLine controller in the project view.
2. Click the
connection to the controller.
3. Select the Diagnostics tab from the Workspace.
4. Click Logbook.
Example: Representation of the logbook in the »Engineer« V2.13
Button
Reset filters
Export...
File in project
Delete
Configure...
Firmware ≤ 11.00 - DMS 8.0 EN - 10/2011
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
8400 StateLine C | Reference manual
icon or execute the OnlineGo online command to establish an online
Function
Reset set filter criteria to display all available logbook entries.
Export the entries available in the logbook into a *.log file.
Exporting logbook entries to a file ( 392)
File the current logbook in the Engineer project to be able to access it offline,
too.
File logbook in project ( 393)
Delete all entries available in the logbook.
Open parameterisation dialog for configuring the logbook.
L
Diagnostics & error management
Logbook
391