2.2 Selection of the appropriate commissioning tool
Commissioning with keypad X400 (diagnosis terminal X400)
The keypad is an alternative to the PC for the local operation,
parameterisation, and diagnostics in a simple manner. The keypad is
especially suitable for test or demonstration purposes and if only a few
parameters have to be adapted.
Commissioning with PC and L-force »EASY Starter«
The L-force »EASY Starter« is a Lenze tool for easy online diagnostics,
parameter setting and commissioning of the controller.
Commissioning with PC and L-force »Engineer«
The L-force »Engineer« is a Lenze engineering software for parameter setting
across all devices, configuring and diagnosing individual components (as for
instance controllers, industrial PCs, motors, I/O systems) and machine control
systems.
For communication between PC and controller, the USB diagnostic adapter can be
used (see the following subchapter).
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
8400 StateLine C | Reference manual
Introduction: Parameterising the controller
Selection of the appropriate commissioning tool
.