Exporting/Importing An Interconnection - Lenze 8400 StateLine C Reference Manual

15.9

Exporting/Importing an interconnection

The interconnection existing in the project can be exported to a file for reuse/transfer to
other devices.

Note!
The file can only be imported to devices of the same device type and version (e.g.
8400 HighLine C V1.0).

How to export the interconnection from the project to a file:
1. Go to the Project view in the context menu of the controller and select the Export
FB interconnection... command.
2. Enter the memory location and the file name for the interconnection to be
exported in the Export FB interconnection dialog box.
3. Click Save to export the interconnection and close the dialog box.

How to import the interconnection from a file to the project:
1. Go to the Project view in the context menu of the controller and select the Import
FB interconnection... command.
2. Select the file with the interconnection to be imported in the Import FB
interconnection dialog box.
3. Click Open to import the interconnection and close the dialog box.
Firmware ≤ 11.00 - DMS 8.0 EN - 10/2011
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
8400 StateLine C | Reference manual
Exporting/Importing an interconnection
L
Working with the FB Editor
771