System Block "Ls_Seterror_1 - Lenze 8400 StateLine C Reference Manual

9.10

System block "LS_SetError_1"

This system block is used for error handling within the application.
 The application can trip up to four different user error messages with parameterisable
error IDs and error responses via the four boolean inputs.
 If several inputs are set to TRUE at the same time, the input with the lowest number
will trip the error message.
Inputs
Identifier
bSetError1
bSetError2
bSetError3
bSetError4
Firmware ≤ 11.00 - DMS 8.0 EN - 10/2011
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Information/possible settings
Data type
Input for tripping "US01: User error
• Error subject number: 980
BOOL
• Error number: (C00581/1
Input for tripping "US02: User error
BOOL • Error subject number: 981
• Error number: (C00581/2
Input for tripping "US03: User error
• Error subject number: 982
BOOL
• Error number: (C00581/3
Input for tripping "US04: User error
• Error subject number: 983
BOOL
• Error number: (C00581/4
L
8400 StateLine C | Reference manual
Diagnostics & error management
System block "LS_SetError_1"
1"
x 0x0400000) + (980 x 0x10000) + (C00161/1)
2"
x 0x0400000) + (981 x 0x10000) + (C00161/2)
3"
x 0x0400000) + (982 x 0x10000) + (C00161/3)
4"
x 0x0400000) + (983 x 0x10000) + (C00161/4)
425