Selecting The Control Mode; Selection Help - Lenze 8400 StateLine C Reference Manual

5.2

Selecting the control mode

The 8400 StateLine controller supports various modes for motor control (open loop or
closed loop).
 V/f characteristic control (VFCplus) with linear characteristic for asynchronous motors
is preset.
 The control mode can be selected in the »Engineer« on the Application parameter tab
via the Motor control (C00006) list field:
 A click on the Motor control... button leads you to the parameterisation dialog of the
selected motor control. (The button is labelled according to the selected motor control.)

Tip!
In order to make the selection of the motor control easier, we provide a selection
help with recommendations and alternatives for standard applications in the
subchapter entitled
The following section briefly describe the control modes. A reference to more details can
be found at the end of each section.
Firmware ≤ 11.00 - DMS 8.0 EN - 10/2011
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
8400 StateLine C | Reference manual
"Selection help".
( 121)
L
Motor control (MCTRL)
Selecting the control mode
117