BSR 64000 Quick Start Guide
•
BSR 64000 Release Notes
These documents provide information about features not described or incorrectly
documented in the main documentation set; known problems and anomalies;
product limitations; and problem resolutions.
•
BSR 64000 SNMP MIB Reference Guide
This document describes the Simple Network Management Protocol (SNMP)
MIBs; provides information that describes standard and proprietary MIB support;
describes how to walk the MIBs and how to compile and load the SNMP MIBs. It
also provides task examples.
•
This document provides instructions and procedures for troubleshooting the BSR
product.
•
This document provides basic tasks used to get the BSR 64000™ out of the box,
running, connected to the network, and operational.
Conventions
This document uses the conventions in the following table:
Convention
angle brackets < >
bar brackets [ ]
vi
BSR Troubleshooting Guide
BSR 64000 Quick Start Guide
Example
ping <ip-address>
ping 54.89.145.71
disable [level]
Explanation
Arguments in italic and enclosed by angle
brackets must be replaced by the text the
argument represents. In the example,
54.89.345.71 replaces <ip-address>. When
entering the argument, do not type the angle
brackets.
Bar brackets enclose optional arguments. The
example indicates you can use the disable
command with or without specifying a level.
Some commands accept more than one
optional argument. When entering the
argument, do not type the bar brackets.