Hv3 Pcb - Canon imagePRESS C1 P Service Manual

Chapter 10
[2]
7) Remove the HV1 PCB unit [1].
- 3 guides [2]
- 1 edge saddle [3]
[2]

10.5.11 HV3 PCB

10.5.11.1 Preparation for Removing the HV3 PCB
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Open the front cover. (page 10-11)Reference [Front Cover Opening]
2) Pull the fixing feeder unit out forward.
10.5.11.2 Removing the HV3 PCB
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Move the registration guide unit [1] in the direction of the arrow.
- 4 screws [2]
[2]
2) Remove the harness from the guide [1], and remove the HV PCB mount
[2].
- 3 connectors [3]
- 3 screws [4]
10-30
[2]
[1]
F-10-118
[3]
[1]
F-10-119
[2]
[1]
F-10-120
[4]
[3]
3) Remove the HV3 PCB [1].
- 3 connectors [2]
- 3 screws [3]
10.5.12 HV5 PCB
10.5.12.1 Preparation for Removing the HV5 PCB
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Remove the right rear upper cover. (page 10-12)Reference [Removing
the Right Rear Upper Cover]
10.5.12.2 Removing the HV5 PCB
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Open the right upper cover [1], remove one screw [2].
0013-9340
0013-9343
2) Remove the connector blanking cover [1].
- 1 screw [2]
[3]
[1]
[4]
F-10-121
[1]
[3]
[3]
F-10-122
[2] [1]
F-10-123
F-10-124
[2]
[3]
[2]
0013-9348
0013-9350
[2]
[1]