Canon imagePRESS C1 P Service Manual page 1133

Chapter 16
Subheading
MB-CCV
TRY-STP
MF-LG-ST
CNT-DISP
OP-SZ-DT
NW-SCAN
HDCR-DSP
16-236
Restrict the use of the control card for mailbox.
Setting range
0: Do not restrict the use.
1: Restrict the use.
Standard value
0
Set a mode not to perform printing when the tray is full.
Setting range
0: Normal mode (Stop printing when the finisher tray is full.)
1: Stop printing only by detecting the height.
Standard value
0
Set a key for the long length paper mode.
Setting range
0: Normal
1: Display the long length key in the corresponding mode screen.
Standard value
0
Set whether or not to display a serial number when pressing the counter check key.
Setting range
0: Display a serial number.
1: Do not display a serial number.
Standard value
0
Set ON/OFF of the document size detection function while the copyboard is open.
Setting range
0: Do not perform the document size detection while the copyboard is open.
- The document size must be manually entered in the control panel.
1: Perform the document size detection while the copyboard is open.
- Use this mode when you need to perform the document size detection automatically even when
you cannot close the copyboard to make copies of a thick book, etc.
- Detection is performed when the start key is pressed.
Standard value
0
Remarks
When SIZE-DET is set to 0, the document size detection is not performed even when OP-SZ-DT
is set to 1.
Set whether or not to permit the network scan function.
0: Do not permit the network scan function.
1: Permit the network scan function.
Standard value
0
Switch the display/operation of HDD clear mode in the user mode.
Setting range
1: Perform clear once with "0".
2: Perform clear once with random data.
3: Perform clear three times with random data.
Standard value
1
MEMO: function for HDD initialization
This is the function to clear the data on HDD completely by overwriting the 0 (null) data and
random data to file data area at the moment of deleting files logically (timing for deleting the
administrative information data) in HDD.
COPIER>OPTION>USER
Contents Level
2
2
2
2
2
2
2