Steering Roller - Canon imagePRESS C1 P Service Manual

Points to Note when Attaching the Refresh Roller Unit
- Be sure to attach the refresh roller after removing the protection sheet. The
protection sheet cannot be removed after attaching the refresh roller.
- Be sure to spread a sheet [3] beneath the fixing roller so as not to damage
it. After attaching the refresh roller unit, draw the sheet [3] out.
8) Remove the refresh roller [1].
- 2 E-rings [2]
- 1 gear [3]
- 3 bearings [4]
- 1 spring [5]
- 1 spacer [6]
- 2 bushings [7]
[2]
[3]
[4]
[6]
[1]

9.7.11 Steering Roller

9.7.11.1 Preparation for Removing the Steering Roller
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Open the front door.
2) Pull out the fixing/feeding unit toward you.
3) Remove the fixing belt unit. (page 9-38)Reference [Removing the Fix-
ing Belt Unit]
4) Remove the fixing belt. (page 9-42)Reference [Removing the Fixing
Belt]
9.7.11.2 Removing the Steering Roller
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Remove the steering roller [1].
- 4 E-rings [2]
- 2 gears [3]
- 1 dowel pin [4]
- 4 bearings [5]
- 2 spacers [6]
[2]
[3]
[2]
9.7.12 Pressure Pad
9.7.12.1 Preparation for Removing the Pressure Pad
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Open the front door.
2) Pull out the fixing/feeding unit toward you.
[4]
[5]
[7]
[2]
[7]
[4]
F-9-119
[2]
[3]
[2]
[1]
F-9-120
3) Remove the fixing belt unit. (page 9-38)Reference [Removing the Fix-
ing Belt Unit]
4) Remove the fixing belt. (page 9-42)Reference [Removing the Fixing
Belt]
5) Remove the oil coating roller. (page 9-44)Reference [Removing the Oil
Coating Roller]
6) Remove the pressure pad cover. (page 9-49)Reference [Removing the
Pressure Pad Cover]
9.7.12.2 Removing the Pressure Pad
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Remove the pressure pad [1].
- 2 screws [2]
2) Detach the stopper plate [2] from the pressure pad [1].
MEMO:
When replacing the pressure pad, detach the stopper plate [2] from the
pressure pad [1]. If the stopper plate [2] cannot be detached, replace
the stopper plate (FC7-1842).
0014-0224
0014-0225
9.7.13 Pressure Pad Cover
9.7.13.1 Preparation for Removing the Pressure Pad
Cover
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Open the front door.
2) Pull out the fixing/feeding unit toward you.
3) Remove the fixing belt unit. (page 9-38)Reference [Removing the Fix-
ing Belt Unit]
4) Remove the fixing belt. (page 9-42)Reference [Removing the Fixing
Belt]
5) Remove the oil coating roller. (page 9-44)Reference [Removing the Oil
Coating Roller]
9.7.13.2 Removing the Pressure Pad Cover
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Remove the pressure pad cover support [1].
- 2 E-rings [2]
- 1 gear [3]
- 1 dowel pin [4]
- 2 bearings [5]
- 1 spacer [6]
0014-0180
- 6 screws [7]
[2]
[1]
F-9-121
[2]
[1]
F-9-122
Chapter 9
0014-0181
[2]
0014-0178
0014-0179
9-49