Development Clutch - Canon imagePRESS C1 P Service Manual

[2]
[1]
When turning the developing rotary, be sure to tighten the developing assem-
bly fixed arm with screw.
5) Remove the developing assembly [1].

7.14.22 Development Clutch

7.14.22.1 Preparation for Removing the Developing
Clutch
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Detach the upper rear right cover.
2) Detach the upper rear cover.
7.14.22.2 Removing the Developing Clutch
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Detach the grounding plate [1].
- 3 screws [2]
[1] [2]
2) Remove the connector [1].
[2]
[1]
F-7-183
[1]
F-7-184
F-7-185
- 4 clamps [2]
3) Remove 3 clamps [1].
4) Remove the DC controller box cover [1].
- 10 screws [2]
0013-9395
[2]
0013-9396
5) Remove 16 clamps [1].
Chapter 7
[2] [1]
F-7-186
[1]
F-7-187
[2] [1]
[2]
F-7-188
[2]
7-97