Canon imagePRESS C1 P Service Manual page 942

Location code
33 fan
50 ADF
61 finisher
62 saddle stitcher
65 puncher
14.ENVRNT
Use it to indicate the environment log.
The machine shows a log of changes taking place as indicated by the readings of the environment sensor and the output of the fixing thermistor: machine inside
temperature in deg C, humidity in %, fixing roller surface temperature (center) in deg C.
Remarks:
The intervals at which data is colleted may be changed in the following service mode item: COPIER>OPTION>BODY>ENVP-IN.
Item
No.
DATE
TIME
D+deg C
E+%
F+deg C
15.HT-C
In case the hue variation occurs, check the value of this item.
Appropriate range: 100 to 600
In case the value is out of the range:
1. Execute the automatic gradation correction (either full correction or quick correction.)
2. If the value is still out of the appropriate range, replace the patch sensor.
Subheading
TGT-A-Y
TGT-A-M
TGT-A-C
TGT-A-K
fixing heat discharge fan
0011
indicates that the original separation alarm condition has occurred 3 times in sequence (i.e., faulty
0010
pickup of the 1st original).
0001 staple absent
stitch staple absent
0001
0001 punch waste case full
order of data collection (highest number indicating oldest data)
date of data collection
time of data collection
machine inside temperature
machine inside Humidity
fixing roller surface (center) temperature
COPIER > DISPLAY > HT-C
Target value in each pattern of ARCDAT (Y in Screen A)
Setting range: 0 to 1023
Standard value: 0
Target value in each pattern of ARCDAT (M in Screen A)
Setting range: 0 to 1023
Standard value: 0
Target value in each pattern of ARCDAT (C in Screen A)
Setting range: 0 to 1023
Standard value: 0
Target value in each pattern of ARCDAT (K in Screen A)
Setting range: 0 to 1023
Standard value: 0
Alarm code
F-16-21
T-16-61
Description
T-16-62
Contents
Chapter 16
Level
2
2
2
2
16-45