Canon imagePRESS C1 P Service Manual page 933

Chapter 16
Subheading
PCI1
USBH-SPD
3.ANALOG
Subheading
TEMP
HUM
ABS-HUM
DR-TEMP
FIX-UC
FIX-UE
FIX-LC
FIX-LE
FIX-EXC
FIX-EXE
DR-TEMPL
4.CST-STS
Subheading
WIDTH-MF
5.JAM
16-36
COPIER > DISPLAY > ACC-STS
Display the name of the board connected to PCII.
30 characters or less
"-" (hyphen) is displayed when the board is not connected.
- Voice board:
- Encryption board:
- GIGA Ethernet board:
Display the connection speed of the USB device.
Display the connection speed of the eight USB devices connected to the USB-Host chip.
- OFF
- LOW
- FLL
- HGH
COPIER > DISPLAY > ANALOG
Use it to check the machine inside temperature (environment sensor; in deg C).
Use it to check the machine inside humidity (environment sensor; in %RH).
Use it to check moisture content (environment sensor; in g).
Temperature around the photosensitive drum
Display the drum surface temperature detected by the drum thermistor.
Unit: deg C
Setting range: 0 to 60 deg C
Use it to check the surface temperature of the middle of the fixing upper roller (as detected by the
main thermistor; in deg C)
Use it to check the surface temperature at the edge of the fixing upper roller (as detected by the
sub thermistor; in deg C)
Use it to indicate the temperature of the center of the fixing lower roller. unit: deg C
Use it to indicate the temperature of the edge of the fixing lower roller. unit: deg C
Use it to indicate the temperature of the center of the outside heating roller. unit: deg C
Use it to indicate the temperature of the edge of the outside heating roller unit: deg C
Temperature of the drum thermopile
Display the drum surface temperature detected by the thermopile.
Unit: deg C
Setting range: 0 to 60 deg C
COPIER > DISPLAY > CST-STS
Use it to check the width of paper in the manual feed tray (in mm).
Contents
T-16-44
Contents
T-16-45
Contents
Level
1
2
Level
1
1
1
1
1
1
1
1
1
1
1
Level
2