Canon imagePRESS C1 P Service Manual page 324

[1]
19) Detach the reader left cover [1].
- 4 screws [2]
[1]
[2]
20) Remove the I/F board shielding plate [1].
- 8 screws [2]
- 2 screws [3]
[3]
[1]
21) Remove the 4 screws [1] and tilt the connector mount [2] forward.
[2]
F-5-225
[2]
F-5-226
[2]
[2]
F-5-227
[1]
22) Remove the cable [3] from the 2 wire saddles [1] and then remove the
reuse band [3].
23) Disconnect the connector [4] and then remove the cable [6] from the
edge saddle [5].
[2]
24) Remove the DF right hinge mount [1].
- 7 screws [2]
[2]
[2]
25) Detach the small cover (right rear).
- 1 screw [2]
Chapter 5
[2]
[1]
F-5-228
[5]
[6]
[4]
[1] [3]
F-5-229
[1]
F-5-230
[2]
5-45