Canon imagePRESS C1 P Service Manual page 1109

Chapter 16
Subheading
FX-SPD
STS-PORT
CMD-PORT
UISW-DSP
NS-CMD5
NS-GSAPI
16-212
COPIER>OPTION>BODY
Make a fine adjustment of the fixing roller speed.
Make a fine adjustment of the fixing speed because the trail edge of paper contacts the ITB and it
sometimes causes a fading image when the loop between the secondary transfer roller and the
fixing roller is too large. When a fine adjustment is made to the fixing speed, the same adjustment
is made to the speed of delivery vertical path. When you increase the setting value, the speed
becomes faster.
Setting range
-3 to 3
Standard value
0
The setting value becomes valid after the main power switch is turned OFF/ON.
Use it to turn on/off the T.O.T (TUIF over TCP/IP) async type status communication port.
Turns on/off the inquiry/response (sync) type status communication port for TUF over TCP/IP.
settings
0: off (default); 1: on
For service NAVI, set the value as '1' when connecting the PC and main body by crossing cable.
MEMO:
T.O.T (TUIF over TCP/IP)
Communication protocol between embedded application presentation (UI) and applications
within the device including COPY/SEND/BOX etc., (Canon original protocol)
Use it to turn off/on the T.O.T (TUIF over TCP/IP) sync type command communication port.
Turns on/off the inquiry/response (sync) type command communication port for TUIF over TCP/
IP.
settings
0: off (default); 1: on
For service NAVI, set the value as '1' when connecting the PC and main body by crossing cable.
MEMO:
T.O.T (TUIF over TCP/IP)
Communication protocol between embedded application presentation (UI) and applications
within the device including COPY/SEND/BOX etc., (Canon original protocol)
Set 'hide' or 'not hide' of the SW to switch the display to the user screen.
Set 'hide' or 'not hide' of the SW to determine which of the normal screen or the simple screen
(Lawson type) is used.
The following types of screen are available.
- Screen that has the function similar to a standard machine
- Screen that has limited function like the screen used at Lawson
A user (a store manager) specifies 'hide' or 'not hide' of the SW to switch these screens.
Setting range
0: Hide
1: Do not hide
Standard value
0
Restrict the use of CRAM-MD5 authentication in SMTP authentication. (NoSasl-Challenge
response authentication mechanism; MD5 message digest algorithm)
Make this setting when restricting the use of CRAM-MD5 authentication in SMTP
authentication.
Setting range
0: Dependent on SMTP
1: Do not use the authentication.
Standard value
0
Restrict the use of GSSAPI authentication in SMTP authentication. (NoSasl-Generic Security
Service Application Program Interface)
Make this setting when restricting the use of GSSAPI authentication in SMTP authentication.
Setting range
0: Dependent on SMTP
1: Do not use the authentication.
Standard value
0
Contents Level
2
2
2
2
2
2