Canon imagePRESS C1 P Service Manual page 225

13) Remove the 2 screws [2] of the hopper cover (upper) [1] to slide it.
14) After four places of claw [1] are matched, printer upper cover [2] is installed.
- 4 screws (RS tightening; M4X8) [2]
15) Secure the toner replacement cover [1] in place.
- 2 screws [2] (use the screws removed in step 13)
16) Close the toner replacement cover.
17) Mount the reader unit rear cover [1].
- 5 screws (RS tightening; M4X8) [2]
F-2-472
F-2-473
[3]
[2]
F-2-474
F-2-475
[1]
[1]
[2]
[1]
[3]
[1]
[2]
Chapter 2
2-131