Removing The Pre-Fixing/Feeding Unit - Canon imagePRESS C1 P Service Manual

- 1 screw [3]
[1] [3]
3) Remove the pre-fixing/feeding unit [1].
3-1) Move it in the direction of the arrow [A], and then, lift it in the direction
of the arrow [B] to remove.
- 3 E-rings [2]
- 2 bearings [3]
- 1 gear [4]
[2]
[4]
[2]
[3]
[A]
Points to Note When Mounting the Pre-Fixing/Feeding Unit.
In the case of mounting the pre-fixing/feeding unit, make sure to execute af-
ter passing the harness [1] through a hole of the edge saddle [2].
[2]

8.10.7.3 Removing the Pre-Fixing/Feeding Unit

imagePRESS C1+ (Printer) / imagePRESS C1+
1) Disconnect the connector [1].
2) Remove the fixing pin [2].
- 1 screw [3]
[2]
F-8-121
[1]
[B]
[3]
[2]
F-8-122
[1]
F-8-123
3) Remove the pre-fixing/feeding unit [1].
3-1) Move it in the direction of the arrow [A], and then, lift it in the direction
of the arrow [B] to remove.
- 3 E-rings [2]
- 2 bearings [3]
- 1 gear [4]
[2]
Points to Note When Mounting the Pre-Fixing/Feeding Unit.
In the case of mounting the pre-fixing/feeding unit, make sure to execute af-
ter passing the harness [1] through a hole of the edge saddle [2].
8.10.8 Fixing/Feeder Unit
8.10.8.1 Preparation for Pulling/Removing the Fixing/
0020-5129
Feeding Unit
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Open the front door.
8.10.8.2 Pulling/Removing the Fixing/Feeding Unit
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
[Pulling out the fixing/feeding unit]
1) Turn the handle in the direction of the arrow.
[1] [3] [2]
F-8-124
[4]
[2]
[3]
[1]
[B]
[A]
F-8-125
[1]
[2]
F-8-126
Chapter 8
[3]
[2]
0014-0086
0014-0087
8-63