Fixing Belt - Canon imagePRESS C1 P Service Manual

Chapter 9

9.7.5 Fixing Belt

9.7.5.1 Preparation for Removing the Fixing Belt
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Open the front door.
2) Pull out the fixing/feeding unit toward you.
3) Remove the fixing belt unit. (page 9-38)Reference [Removing the Fix-
ing Belt Unit]
9.7.5.2 Removing the Fixing Belt
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Fix the fixing belt unit [1] to the 2 ribs [3] of the fixing front cover [2] to
stand.
[3]
Wrap the fixing belt [1] with paper [2] to avoid direct contact with hands.
2) Push the steering roller [1] in the direction of the arrow [A] to release the
tension of the belt, and then, pull out the fixing belt [2] in the direction of
the arrow [B].
9-42
[1]
[2]
F-9-76
[1]
[2]
F-9-77
0014-0176
UNLOCK
0014-0177
In the case of removing the fixing belt [1], take care to handle the areas indi-
cated in [2] so that the fixing belt is not damaged.
[1]
Points to Note When Mounting the Fixing Belt
- For the position to mount the fixing belt, make sure to set it around the
center against the roller shaft. As for the position of the shaft direction of
the fixing belt, it can be placed around the center (guess by the eye) at the
time of mounting because it will be automatically corrected after turning
on the power.
- When inserting the fixing belt to the fixing belt unit, make sure to apply
tension of the belt by pulling the lock plate [1].
[1]
LOCK
[A]
[B]
F-9-78
F-9-79
LOCK UNLOCK
F-9-80
[1]
[2]
[2]