Construction - Canon imagePRESS C1 P Service Manual

4.1 Construction

4.1.1 Configuration and Functions
imagePRESS C1 P / imagePRESS C1
The Main Controller primarily has the following configuration and functions.
[1] Main Controller Circuit Board (MAIN)
[2] Panel I/F Circuit Board
[3] Main Controller Circuit Board (SUB R-A)
[4] Main Controller Circuit Board (SUB PF-A, DE-A)
[5] Relay Circuit Board (Gu-short)
Main Controller Circuit Board (SUB O-B)
[6] Main Controller Circuit Board (SUB S-B, ZJ-A)
[7] Main Controller Circuit Board (SUB LAN-bar-A)
[8] BOOT ROM
[9] SRAM Circuit Board
[10] DDR-SDRAM
[11] LIPS LX Printer & Scanner Kit Circuit Board (RB-A)
HDD HDD
PC Board Name
T-4-1
System control, memory control, and printer output image processing control
Operation panel interface control
Color space conversion, rotation for electronic sorting, binarization, resolution
conversion
Image processing for printer output (color space compression, under color removal, log
conversion, direct mapping, color balance, fine zoom adjustment, gradation conversion,
screen processing, trimming, add-on)
Bus connections (when EFI controller is not connected)
EFI controller connection
Scanner interface, scanner image processing (resolution conversion, image rotation,
compression/decompression)
LAN connection, HDD controller, HDD power supply
ROM memory storing the boot program
SRAM mounting
Program-related data save, image data save
LIPS LX Printer & Scanner Kit features add-on (optional)
System software storage, image data storage, image data save for BOX/FAX function
Function
Chapter 4
0013-0326
4-1