Delivery - Canon imagePRESS C1 P Service Manual

Chapter 8

8.9 Delivery

8.9.1 Overview
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / imagePRESS C1+
Delivery Method
Face-up delivery
Face-down delivery
8.9.2 Face-up Delivery
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / imagePRESS C1+
When the delivery solenoid (SL3) is turned ON, the flapper [1] moves down, and paper is fed to the decurler assembly.
8.9.3 Face-down Delivery
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / imagePRESS C1+
1) When the delivery solenoid (SL3) is turned OFF, paper is fed in the direction of duplexing feeding assembly.
M10: Duplexing reversal motor
PS17: Reversal inlet sensor
8-50
Operation Mode
- When printing by 1-on-1 copying
- When printing multi-copies from 1 sheet of original (Face-down delivery is used when the finisher is mounted)
- When selecting non-fixed size for manual tray feeding
- When selecting OHT/label/post card
- When operation modes other than those above are used
- Can be switched to face-down delivery from Service Mode (COPIER>OPTION>BODY>FDW-DLV) when using above-
mentioned modes
[1]
SL3
T-8-11
F-8-76
0012-8484
0012-8485
0012-8486