Print (Constant Speed) - Canon imagePRESS C1 P Service Manual

9.2.2 Print (Constant Speed)

imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / imagePRESS C1+
- In the case of plain paper (=/<105g/m2)
Interval
STBY (standby)
INTR (initial rotation)
PRINT (print)
LSTR1(last rotation 1)
LSTR2(last rotation 2)
LSTR3(last rotation 3)
Fixing main heater
(H1)
Fixing sub heater
(H2)
Outside heater
(H4)
Inlet heater
(H3)
Fixing motor
(M38)
Fixing belt attach/detach
detachment->
motor (M34)
Outside heating
detachment->
attach/detach motor (M45)
Fixing web attach/
detachment->
detach motor(M33)
Fixing belt drive motor
(M36)
Fixing web solenoid
(SL11)
Fixing belt cooling fan
1 4 (FM11 14)
*1: H3 and H4 turn ON in alternate shifts
*2: In the black-and-white mode/overseas models, temperature is controlled according to the temperature detected by the main thermistor (THM1) and sub ther-
mistor (THM2). As for black-and-white/Japanese models, temperature is controlled by the main heater.
*3: Fixing web solenoid is turned ON once for each small paper, and twice for each paper larger than that.
*4: 1/3-speed rotation
*5: Constant speed rotation
*6: Only when the temperature of the inlet roller main thermistor (THM3) is detected as 100 deg C or more.
Description
Ready for a print request signal
<Control Temperature>
fixing roller surface temperature = 165 deg C/outside heating roller surface temperature = 200 deg C/fixing belt surface
temperature = 95 deg C
Time from receipt of the print request signal to sending image signal
Time from the print start to delivery of paper. Control temperature varies according to the color mode.
<Control Temperature.>
Full color: Fixing roller surface temperature = 155 deg C/ Outside heating roller surface temperature =200 deg C / Fixing belt
surface temperature = 95 deg C
Black-and-white: Fixing roller surface temperature = 160 deg C / Outside heating roller surface temperature =200 deg C / Fixing
belt surface temperature = 95 deg C
In the case the fixing belt surface temperature reaches =/> 95 deg C
In the case the fixing belt surface temperature reaches =/> 160 deg C
In the case the fixing roller surface temperature =/> 155 deg C /outside heating roller surface temperature =/> 200 deg C /fixing
belt surface temperature =/> 90 deg C
STBY INTR
2
2
1
1
4
attachment
attachment
attachment
6
PRINT
5
3 3
F-9-11
LSTR1 LSTR2 LSTR3 STBY
1
4
detachment
detachment
detachment
6
Chapter 9
0012-0965
9-11