Fixing Locking Heater - Canon imagePRESS C1 P Service Manual

Chapter 9

9.7.24 Fixing Locking Heater

9.7.24.1 Preparation for Removing the External Heater
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Open the front door.
2) Pull out the fixing/feeding unit toward you.
9.7.24.2 Removing the External Heater
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Detach the fixing upper cover [1].
- 2 stepped screws [2]
- 1 screw [3]
[1]
2) Remove the harness guide [1].
- 2 screws [2]
[2]
[1]
3) Pull out the external pressure roller assembly [1] in the direction of the ar-
row.
- 2 screws [2]
9-56
[1]
F-9-159
[2] [3]
F-9-160
F-9-161
0014-0219
Points to Note When Removing/Mounting the External Heater
In the case of removing/mounting the external heater, take care not to scratch
the surface of the roller as indicated in the figure below.
0014-0220
4) Remove the external heat roller unit [1].
- 1 screw [2]
- 2 springs [3]
[3]
5) Pull out the external heater [1] in the direction of the arrow.
[1]
[2]
[1]
F-9-162
F-9-163
[1]
F-9-164
F-9-165
[2]
[3]
[2]