Chapter 2
[1]
[2]
[1]
Document Tray
[2]
Washer
[3]
Stepped screw
[4]*
Stepped screw (M4)
[5]*
Stepped screw (M4X10.8)
* Not used in this host machine.
2.9.3 Checking the Contents
imagePRESS C1+ (Printer)
[1]
[2]
[1]
Document Tray
[2]
Washer
[3]
Stepped screw
[4]*
Stepped screw (M4)
* Not used in this host machine.
2.9.4 Installing the Document Tray
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Remove the 2 rubber caps [1].
2-96
[3]
[4]
[5]
F-2-366
1 pc.
2 pc.
2 pc.
2 pc.
2 pc.
[3]
[4]
F-2-367
1 pc.
2 pc.
2 pc.
2 pc.
2) Mount the 2 washers [1] and the 2 stepped screws [2] on the upper right
cover of the host machine.
When attaching the stepped screw, if the stepped screw is fully tightened,
there is no space left for the Document Tray to be attached. Be sure to secure
a certain space while maintaining the stability of the Document Tray.
0021-2145
3) Fit the notches [2] of the reinforcement plate of the Document Tray [1]
into the stepped screws [3].
2.10 Installing the Platen Cover
2.10.1 Checking the Contents
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
0013-7488
<Platen Cover Type K>
[1]
F-2-368
[1]
[1]
[2]
F-2-369
[3]
[2]
[2]
F-2-370
[2]
[1]
0013-6441