Removing The Scanner Home Position Sensor (Imagepress C7000 Series) - Canon imagePRESS C1 P Service Manual

[2]
6) Remove the sensor mount [1].
- 1 screw [2]
[1]
[2]
7) Remove the scanner home position sensor [1].
- 1 connector [2]
[2]
5.4.11.2 Removing the Scanner Home Position Sensor
(imagePRESS C7000 Series)
Color Image Reader-H1
1) In the case of the copyboard cover, detach the upper rear face plate 1 [1].
- 1 screw [2]
[1]
2) Detach the upper rear face cover 3 [1].
<In case of ADF>
[1]
[2]
F-5-183
F-5-184
[1]
F-5-185
[2]
F-5-186
- 2 screws [1]
<In case of copyboard cover>
- 1 screw [1]
3) Detach the top rear cover [1] of the sub station and remove the filter [2].
- 6 screws [3]
When tightening the 2 screws at the top surface, be sure to tighten them
while pressing the upper rear cover in the direction of the arrow.
0016-9501
[3]
[3]
4) Detach the connector base [1].
- 2 screws [2]
[1]
F-5-187
[1]
F-5-188
[2]
[1]
[3]
F-5-189
Chapter 5
[3]
5-39