Canon imagePRESS C1 P Service Manual page 1107

Chapter 16
Subheading
FDW-DLV
RMT-LANG
IFAX-LIM
SMTPTXPN
SMTPRXPN
POP3PN
UI-BOX
TMC-SLCT
16-210
COPIER>OPTION>BODY
Select the 'face up' or 'face down' delivery when specifying multiple copies.
When multiple copies are specified, 'face up' delivery is usually performed. However, this mode
is provided to perform 'face down' delivery to guarantee stacking condition.
(However, this mode is invalid when a finisher is installed.)
Setting range
0: 'Face up' for all setting for one sheet of document
1: 'Face up' when specifying one copy, and 'face down' when specifying multiple copies for one
sheet of document
Standard value
0
The setting mode becomes valid after the power switch is turned OFF/ON.
Switch the remote UI language used on Web.
Setting method
Select the language code using the +/- key.
Restrict the number of lines output when receiving large volume of data by iFAX
Setting range
0: No restriction
0 to 999
Standard value
500
Change the port number for SMTP transmission.
Setting range
0 to 65535 (incremented by 1)
Standard value
25
Change the port number of SMTP reception.
Setting range
0 to 65535 (incremented by 1)
Standard value
25
Change the port number of POP reception.
Setting range
0 to 65535 (incremented by 1)
Standard value
110
Restrict the box screen display in the control panel.
Setting range
0: BOX function unavailable (Unavailable for PDLtoBox)
1: BOX function available
2: BOX function available with restriction (Unavailable for LUI and RUI, but available for
PDLtoBOX)
Standard value
1
Switch the coefficient used for error diffusion.
Use this mode to increase dot stability and granularity so that pitch unevenness or course image
that occurred on an image can be made invisible.
Setting range
0: Normal
1: Low granularity / low stability
2: High granularity / high stability
Standard value
0
Contents Level
2
2
2
2
2
2
2
2