Along with the release of system software Ver. 22.04, a new service mode was added to display the voltage and threshold values of the sensor on the waste

toner box. These values can be checked simply by making the following selections in sequence: service mode > COPIER > Display > MISC > WTN-V.

- Default values: voltage = 20, threshold = 25

- Display: current voltage = left, threshold = right

The operation of the sensor on the waste toner box cannot be checked in the I/O mode screen. To check it, see the voltage displayed in service mode "WTN-V."

14.3.8.2 FAQ on LIPS Specifications

14.3.8.2.1 How to transfer License Option (LMS)

imagePRESS C1 P / imagePRESS C1 / Color Image Reader-H1 / imagePRESS C1 (CUSTOM) / imagePRESS C1+ (Printer) / imagePRESS C1+

[ Case in the field ]

Description

In order to use license options such as SEND, Print and others in a new machine after because of replacement of the original machine, licenses of such options

have to be transferred to the new machine.

Field Remedy

1. Invalidate the license of an option that are used with the original machine and obtain an invalidation certificate key.

2. Obtain a new license key for the new machine.

3. Install the new license key in the new machine.

For more details, refer to the attached "How to Invalidate and Transfer A License."

14.4 Outline of Electrical Components

14.4.1 Clutch/Solenoid

14.4.1.1 List of clutch / solenoid

imagePRESS C1 P / imagePRESS C1

1. Reader unit

The reader unit has no clutch and solenoid.