Removing The Adf Open/Close Sensor(Imagepress C7000 Series) - Canon imagePRESS C1 P Service Manual

Imagepress c1 series
Table of Contents

Advertisement

[2]
4) Remove the ADF open/close sensor [1].
- 1 connector [2]
5.4.10.2 Removing the ADF Open/Close
Sensor(imagePRESS C7000 Series)
Color Image Reader-H1
1) In the case of the copyboard cover, detach the upper rear face plate 1 [1].
- 1 screw [2]
[1]
2) Detach the upper rear face cover 3 [1].
<In case of ADF>
- 2 screws [1]
[1]
F-5-170
[2]
[1]
F-5-171
[2]
F-5-172
<In case of copyboard cover>
- 1 screw [1]
0016-9500
3) Detach the top rear cover [1] of the sub station and remove the filter [2].
- 6 screws [3]
When tightening the 2 screws at the top surface, be sure to tighten them
while pressing the upper rear cover in the direction of the arrow.
[3]
[3]
4) Detach the connector base [1].
- 2 screws [2]
[1]
F-5-173
[1]
F-5-174
[2]
[1]
[3]
F-5-175
Chapter 5
[3]
5-37

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imagepress c1Imagepress c7000 series

Table of Contents