Fixing Cleaning Web Mechanisms - Canon imagePRESS C1 P Service Manual

Chapter 9
Error code:
E842(Fixing belt locking error)
0002 Belt HP sensor failes to detect within 5 sec after detecting home position
0012 In the case that the home position is logically displaced when starting the operation.
0102 In the case that it's not located in the specified position when completing the operation.

9.5 Fixing Cleaning Web Mechanisms

9.5.1 Controll of the Fixing Cleaning Web Drive
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / imagePRESS C1+
To avoid fixing offset, the residual toner found on the fixing roller is first collected on the collecting roller, and then removed by the cleaning web (maybe with
silicone oil).
[1] Fixing roller
[2] Collecting roller
[3] Web wrapping roller
[4] Cleaning web
The cleaning web is taken up by the web take-up roller when the drive of the fixing web solenoid (SL11) reaches the web take-up roller drive gear through a one-
way clutch.
9-24
[4]
[2]
F-9-24
[3]
[1]
0013-3410