Canon imagePRESS C1 P Service Manual page 570

E-code Main cause
E197 Fixing unit communication error
E805 Fixing belt cooling fan
E842 Outside heating roller separation
error
Outside heating roller
engagement error
Fixing belt engagement error
Cleaning belt engagement error
Detail code Detail
0002 The communication error occurs 10 times in succession during the process
of the communication initialization sequence between the DC controller
and the fixing delivery unit.
0003 The communication error occurs 10 times in succession after the
completion of the initialization sequence between the DC controller and the
fixing delivery unit.
0004 Indicates that 24V ON notification of the fixing delivery block is not
detected via the communication between the DC controller and the fixing
delivery unit when starting the initial multiple rotation of the Bk drum.
000E Indicates the detection of the lock signal of the fixing belt cooling fan 1.
000F Indicates the detection of the lock signal of the fixing belt cooling fan 2.
0010 Indicates the detection of the lock signal of the fixing belt cooling fan 3.
0011 Indicates the detection of the lock signal of the fixing belt cooling fan 4.
0009 Indicates that the condition, the outside heating roller keeps contact with the
fixing roller for 300 msec while the fixing roller has been stopped, is
detected in terms of the hardware.
0001 Indicates that the engagement is not detected by HP sensor within 5 sec
from the start of HP detection.
0011 Indicates the logical displacement of HP sensor at the time of operation.
0101 Indicates that the outside heating roller is not at the predetermined position
when completing the operation.
0002 Indicates that the engagement is not detected by the belt HP sensor within
5 sec from the start of HP detection.
0012 Indicates the logical displacement of HP sensor at the time of operation.
0102 Indicates that the fixing belt is not at the predetermined position when
completing the operation.
0003 Indicates that the engagement is not detected by the cleaning belt HP sensor
within 5 sec from the start of HP detection.
0013 Indicates the logical displacement of HP sensor at the time of operation.
0103 Indicates that the cleaning belt is not at the predetermined position when
completing the operation.
Chapter 9
Recovery method
9-33