Canon imagePRESS C1 P Service Manual page 997

Chapter 16
Subheading
CLN-EXP
CLN-EXP2
14.P-PASCAL
Use it if the gradation fault is occurred after executing the printer PASCAL.
Subheading
CS1OFWMY
CS1OFWIM
CS1OFDMM
CS1OFDMY
CS1OFDIM
CS1OFDIY
CS1OFHMM
CS1OFHMY
CS1OFHIM
16-100
COPIER>ADJUST>EXP-LED
Set a cleaner pre-exposure current. (image area)
Set the light volume of cleaner pre-exposure for an image area at printing.
Setting range
5 to 10 (Unit: 10mA)
Standard value
8
Set the cleaner pre-exposure current. (color/paper internal)
Set the light volume of cleaner pre-exposure for color/paper interval.
Setting range
5 to 10 (Unit: 10mA)
Standard value
8
COPIER>ADJUST>P-PASCAL
Adjust the main unit offset of the solid white actual measurement brightness value Y for Color
Sensor 1.
Setting range: 0 to 1023
Standard value: 0
Adjust the main unit offset of the solid white ideal brightness value M for Color Sensor
Setting range: 0 to 1023
Standard value: 0
Adjust the main unit offset of the solid actual measurement brightness value M for Color Sensor 1.
Setting range: 0 to 1023
Standard value: 0
Adjust the main unit offset of the solid actual measurement brightness value Y for Color Sensor 1.
Setting range: 0 to 1023
Standard value: 0
Adjust the main unit offset of the solid ideal brightness value M for Color Sensor 1.
Setting range: 0 to 1023
Standard value: 0
Adjust the main unit offset of the solid ideal brightness value Y for Color Sensor 1.
Setting range: 0 to 1023
Standard value: 0
Adjust the main unit offset of the HT actual measurement brightness value M for Color Sensor 1.
Setting range: 0 to 1023
Standard value: 0
Adjust the main unit offset of the HT actual measurement brightness value Y for Color Sensor 1.
Setting range: 0 to 1023
Standard value: 0
Adjust the main unit offset of the HT ideal brightness value M for Color Sensor 1.
Setting range: 0 to 1023
Standard value: 0
T-16-100
Contents
T-16-101
Contents
Level
1
1
Level
1
1
1
1
1
1
1
1
1