Attaching The Scanner Motor (Imagepress C1 Series/Imagepress C7000 Series) - Canon imagePRESS C1 P Service Manual

Chapter 5
[3] [2]
[3]
[1]
5) Remove the connector base [1].
- 2 screws [2]
6) Detach the reader rear cover [1].
- 1 connector [2]
- 5 screws [3]
[2]
[3]
7) Detach the reader upper rear cover [1].
- 1 screw [2]
- 1 emboss [3]
[1] [3]
8) For the subsequent steps, see step 4 to 9 in 'Removing the Scanner Motor'
5-36
[3]
[3]
F-5-163
[1]
[2]
F-5-164
[1]
F-5-165
[2]
F-5-166
(in the case of imagePRESS C1 Series).
5.4.9.4 Attaching the Scanner Motor (imagePRESS C1
Series/imagePRESS C7000 Series)
imagePRESS C1 / Color Image Reader-H1 / imagePRESS C1+
When attaching the scanner motor, be sure to check that the timing belt [3]
has been surely set to the scanner pulley [1] and the motor shaft [2].
[2]
5.4.10 ADF Open/Close Sensor
5.4.10.1 Removing the ADF Open/Close Sensor
(imagePRESS C1 Series)
imagePRESS C1 / Color Image Reader-H1 / imagePRESS C1+
1) Detach the reader rear cover [1].
- 1 connector [2]
- 5 screws [3]
[2]
[3]
2) Detach the reader rear upper cover [1].
- 1 screw [2]
- 1 embossed section [3]
[1] [3]
3) Remove the ADF open/close sensor support plate [1].
- 1 screw [2]
[3] [1]
F-5-167
[1]
F-5-168
[2]
F-5-169
0014-2025
0013-9962