Turning The Main Power On - Canon imagePRESS C1 P Service Manual

5) Check the folliwing setting
Service mode: COPIER > OPTION > BODY > CLCONFIG
Make sure that this setting is set to "0".

2.2.23 Turning the Main Power ON

imagePRESS C1+ (Printer) / imagePRESS C1+
Before turning the main power on, be sure to remove the packing materials.
1) Connect the 2 power plugs (1 for the backside, and 1 for the left side of
the machine) of the machine to different power outlets, and turn on the
main power [1].
230V
230V
120V
1.3A
15.1A
120V 100V
2.6A
100V
2.9A
SUB
ON
OFF
F-2-203
9.2A
15A
MAIN
F-2-204
[1]
2) Check the sett of 4-color/5-color model.
Service mode: COPIER > OPTION > BODY > CLCONFIG
- In case of 4-color model, make sure that this setting is set to "1".
- In case of 5-color model, make sure that this setting is set to "0".
2.2.24 Turning the Main Power ON
0020-5078
imagePRESS C1+ (Printer) / imagePRESS C1+
Before turning the main power on, be sure to remove the packing materials.
1) Connect the power cable with the inlet on the main body.
Use the correct power code to mach the location/area of installation. Make
sure not to leave unused power code at the site.
2) Connect the 2 power plugs (1 for the backside, and 1 for the left side of
the machine) of the machine to different power outlets, and turn on the
main power [1].
Chapter 2
[1]
ON
OFF
F-2-205
0020-7010
2-63