Canon imagePRESS C1 P Service Manual page 883

Chapter 15
XX YY Description
If cannot recognize HDD
If cannot find the start partition
01 (BOOTDEV) at start-up
If the system for main CPU
02
does not exist
If the operation is interrupted
when writing into BootDevice
03
00
If system for sub-CPU does not
06
exist
If ICC profile (color resource
07
file) does not exist
If the files on HDD to be
12 reviewed by WEB browser are
broken or deleted
Patch data for main scanning
13
shading does not exist
If cannot recognize HDD
If cannot find the start partition
14 (BOOTDEV) at start-up
<E602-XXYY>
In case of XX=[01-13,FF]
CHK- Corresponding
XX
TYPE partition
1 FSTDEV
2 IMG_MNG
1
3 FSTCDEV
4 THUMDEV
5 APL_GEN
6 TMP_GEN
2
7 TMP_FAX
8 TMP_PSS
9 3 PDLDEV
10 4 BOOTDEV
11 5 APL_MEAP
12 6 APL_SEND
13 7 APL_KEEP
14 8 APL_LOG
can not be
FF 0
specified
15-20
1. Turn OFF the power and check the connection of HDD cable. After that, turn ON the power.
2. When turning ON the power, put an ear onto HDD or touch HDD to check whether the inner disk is rotating or
not.
3. Replace HDD (after replacement, system needs to be reinstalled).
4. Replace the main controller PCB (MAIN-M)
1. Start in safe mode and execute all format and reinstallation of system via SST, and then, turn OFF/ON the power.
2. Replace HDD (after replacement, system needs to be reinstalled).
Measures differ depending on an error display.
<If an error code screen is displayed in B&W>
1. After turning OFF the power, turn ON the power while pressing 1 and 9 keys.
This operation starts the repair processing of writing interrupted sector automatically (at this time, screen display
will be solid black). During the repair processing of writing interrupted sector, progress status is displayed on a
screen and it will be completed when the screen display will be blanc. After the completion, turn OFF/ON the
power.
2. Start in safe mode and execute all format and reinstallation of system via SST, and then, turn OFF/ON the power.
3. Replace HDD (after replacement, system needs to be reinstalled).
<In case of normal error code display (spanner mark>)
1. Specify CHK-TYPE=0 and execute HD-CHECK. After completion, turn OFF/ON the power.
2. Start in safe mode and execute all format and reinstallation of system via SST, and then, turn OFF/ON the power.
3. Replace HDD (after replacement, system needs to be reinstalled).
1. Start in safe mode and execute all format and reinstallation of system via SST, and then, turn OFF/ON the power.
2. Replace HDD (after replacement, system needs to be reinstalled).
1. Start in safe mode and execute all format and reinstallation of system via SST, and then, turn OFF/ON the power.
2. Replace HDD (after replacement, system needs to be reinstalled).
1. Reinstall WEB browser contents.
2. Replace HDD (after replacement, system needs to be reinstalled).
1. Reinstall the patch data for main scanning shading via SST.
2. Replace HDD (after replacement, system needs to be reinstalled).
1. Turn OFF the power and check the connection of HDD cable. After that, turn ON the power.
2. When turning ON the power, put an ear onto HDD or touch HDD to check whether the inner disk is rotating or
not.
3. Replace HDD (after replacement, system needs to be reinstalled).
4. Replace the main controller PCB (MAIN-M)
XX
Description
Compressed image data (BOX etc.)
Document management table, profile
Job archiving (chasing)
Thumbnail
Universal data
Universal data (temporary files)
Not used
For PDL spooling (temporary files)
PDL related files (front, registration form, color
correction information file for PDL function)
Firmware (System/MEAP/key/license/PDF
dictionary/RUI contents/voice dictionary)
MEAP application
Address book, filter
MEAP save data
System logs
HDD full failure sector check and recovery
T-15-3
Measures
T-15-4
Occurrence at start-up
00,01,02,0
3 5
4
Measures
*1 *5
*9
*3 *8
*1 *5
*2 *5
*3 *8
*1 *5
*4 *7
YY
At normal operation
11,21 13,25 10,12,14,22,23,24
Measures
*10 *11 *12