Canon imagePRESS C1 P Service Manual page 1020

Subheading
CL-ON
Start checking the operation of a clutch.
Operation method
1) Select an item and press the OK key. ON/OFF operation is repeated in the following pattern.
ON for 0.5 seconds --> OFF for 5 seconds --> ON for 0.5 seconds --> OFF for 5 seconds --> OFF
FAN Specify a fan to be checked.
(Range: 1 to 30)
1) Select an item.
2) Enter the code of a fan using numeric keys.
1. FM1: Primary charging intake fan
2. FM2: Primary charging exhaust fan
3. FM3: Feeding fan (front)
4. FM4: Feeding fan (rear)
5. FM5: Fixing exhaust fan
6. FM6: Fixing lower front fan
7. FM7: ITB cleaning brush roller cooling fan
9. FM9: Power supply fan
10. FM10: Delivery upper cooling fan 1
11. FM11: Fixing belt cooling fan 1
12. FM12: Fixing belt cooling fan 2
13. FM13: Fixing belt cooling fan 3
14. FM14: Fixing belt cooling fan 4
15. FM15: Delivery lower cooling fan
16. FM16: Left exhaust fan
17. FM17: Post-fixing lower fan
18. FM18: Primary exhaust assist fan
19. FM19: Delivery cooling fan 2
20. FM20: Reverse cooling fan
21. FM21: Buffer cooling fan
22. FM22: Main unit rear fan
23. FM23: Fixing upper exhaust fan
24. FM25: OP power supply 1 fan
25. FM26: OP power supply 2 fan
3) Press the OK key.
4) Press FAN-ON and check the operation.
FAN-ON
Start the fan operation.
Operation method
1) Select this item and press the OK key to start the following operation.
ON in full speed for 10 seconds --> End
COPIER>FUNCTION>PART-CHK
Contents
Chapter 16
Level
1
1
1
16-123