Canon imagePRESS C1 P Service Manual page 150

Chapter 2
[2]
[1]
4) Hook the claw [2] of the control panel arm unit [1], and tighten the screws
(binding; M4X10) in the order of the 4 [3] and the 4 [4].
- Be sure to tighten the screws in the order indicated.
- Do not fall the screw off inside the machine.
[1] [3]
[4]
5) Adjust the length of the control panel interface cable [1] from the edge
saddle [2] to the Film [3] to about 5 cm [4] and fix it with the edge saddle
[2].
2-56
[3]
F-2-167
[2]
[3]
[4]
F-2-168
[4]
[1]
[3]
6) Fix the arm cover mount 2 [1].
- 1 screw (Binding; M4X10) [2]
[2]
[1]
7) Fix the arm cover mount 1 [1].
- 1 screw (Binding; M4X10) [2]
8) Run the control panel interface cable [2] through the arm cover 2 [1], and
attach it to the control panel arm unit.
[2]
9) Fix the arm cover 2 [1].
- 2 screws (Binding; M4X10) [2]
- 2 cover rubber pieces (Large) [3]
[2]
F-2-169
F-2-170
[1]
[2]
F-2-171
[1]
F-2-172