Jam Code (Adf-Related) - Canon imagePRESS C1 P Service Manual

Chapter 15
Code Type of Jam
1004 Delivery path sensor, Feed delay jam
1102 Punch path sensor (punch registration sensor), Feed delay jam
1104 Delivery path sensor, Feed delay jam
1106 Process tray sensor, Feed stationary jam
1200 Early arrival jam
1500 Staple jam
1300 Power on jam
1400 Door open jam
1644 Punch power on jam
1645 Punch power on jam
1791 Saddle feed sensor, feed delay jam
1792 Saddle feed sensor, feed delay jam
17A1 Saddle feed sensor, feed stationary jam
17A2 Saddle feed sensor, feed stationary jam
1786 Saddle stapler staple jam
1787 Saddle power on jam
1788 Saddle door open jam

15.4.3 Jam Code (ADF-Related)

imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / imagePRESS C1+
Code Type of Jam
0001 Separation delay
0002 Pickup delay
0003 Pickup stationary 1
0004 Pickup stationary 2
0005 Reverse delay
0006 Reverse stationary
15-26
Sensor No.
PI104
PI104
PI103
P150
PI103,PI104,PI118
PI102,MSW101
PI63
LED5,PTR5
PI102
T-15-11
Sensor No. Details
S4 When the separation sensor fails to detect a document after it is fed by a specified amount (221mm) after
the startup of the separation motor during the separation operation.
S4,S2 When the registration roller front sensor fails to detect a document after it is fed by a specified amount
(93mm) after the separation sensor detects the leading edge of the sheet during the separation operation.
S3 When the registration roller rear sensor fails to detect a document after it is fed by a specified amount
(40mm) after the startup of the reverse motor during the pickup operation.
S2 When the registration roller front sensor detects a document after it is fed by a specified amount (small:
330mm/ large: 660mm) after the startup of the reverse motor during the pickup operation.
S1 When the reverse sensor fails to detect a document after it is fed by a specified amount (104mm) from
the platen roller during the reverse operation.
S1 When the reverse sensor detects a document after it is fed by a specified amount (length of document x
1.5mm) after the loop formation is completed during the reverse operation.
Details
The stacker delivery path sensor fails to detect a sheet even if a
specified length of time passes after the inlet path sensor detects it.
The punch path sensor fails to detect a sheet even if a specified length
of time passes after the delivery signal is received.
A sheet fails to come out of the stacker path sensor even if it is fed for
a certain length of time (distance) after the stacker path sensor detects
it.
A sheet fails to come out of the process tray sensor even if it is fed for
a certain length of time (distance) after the process tray starts paper
delivery.
When a sheet is detected before the Finisher becomes able to receive it.
Staple jam
When a sheet is detected by any of the inlet path sensor or the delivery
sensor of the Stacker unit when power is turned on.
When the front door is opened while the machine is in operation.
When a punch jam occurs.
When a sheet is detected by the punch registration sensor when the
power is turned on.
When the Finisher inlet sensor fails to detect a sheet even if a specified
length of time passes after a Saddle delivery request is received from
the Finisher.
When the Saddle delivery sensor fails to detect a sheet even if the
folding roller feeds a stack of sheets by a specified amount after the
thrust operation using the thrust plate is finished.
When a sheet fails to come out of the Saddle inlet sensor even if the
Saddle feed motor feeds it by a specified amount after the Saddle inlet
sensor detects the leading edge of the sheet.
When a sheet fails to come out of the Saddle delivery sensor even if
the folding motor feeds a stack of sheets by a specified amount after
the Saddle delivery sensor detects the leading edge of the sheet.
When a staple jam occurs in the stapler in the Saddle unit.
When any of the Saddle inlet sensor, Saddle process tray sensor, or
Saddle delivery sensor detects a sheet when the power is turned on.
When opening of the front door is detected while the Saddle unit is in
operation.
0012-4839