Canon imagePRESS C1 P Service Manual page 927

Chapter 16
Location code
02 scanner
04 pickup/feed
33 fan
50 ADF
61 finisher
62 saddle stitcher
65 puncher
13.ENVRNT
Use it to indicate the environment log.
The machine shows a log of changes taking place as indicated by the readings of the environment sensor and the output of the fixing thermistor: machine inside
temperature in deg C, humidity in %, fixing roller surface temperature (center) in deg C.
Remarks:
The intervals at which data is colleted may be changed in the following service mode item: COPIER>OPTION>BODY>ENVP-IN.
Item
No.
DATE
TIME
D+deg C
E+%
F+deg C
15.HT-C
In case the hue variation occurs, check the value of this item.
Appropriate range: 100 to 600
In case the value is out of the range:
1. Execute the automatic gradation correction (either full correction or quick correction.)
2. If the value is still out of the appropriate range, replace the patch sensor.
16-30
indicates the presence of dirt on the glass for stream reading.
0002
line correction alarm (upon detection of dust on the stream reading glass between originals)
0020
0001 cassette 1 lifter error
0002 cassette 2 lifter error
0003 cassette 3 lifter error
0004 cassette 4 lifter error
0008 optional deck lifter error
0011 fixing heat discharge fan
indicates that the original separation alarm condition has occurred 3 times in sequence (i.e., faulty
0010
pickup of the 1st original).
0001 staple absent
0001 stitch staple absent
punch waste case full
0001
order of data collection (highest number indicating oldest data)
date of data collection
time of data collection
machine inside temperature
machine inside Humidity
fixing roller surface (center) temperature
T-16-39
Alarm code
F-16-17
T-16-40
Description