3) Enter a check mark against the SMS Installer Service (Remote Login Service Authentication) radio button and click on either Start or Stop. Check that the status

has changed accordingly.

4) Log out and then log in again and access via the RLS authentication login window.

When RLS authentication has been set to Start, the RLS entry window will now be displayed. If RLS authentication has been set to Stop, when an attempt is

made to log in, the error message shown below will be displayed and login will not be possible.

11.1.6 Checking Application List

imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / imagePRESS C1+

The page of Application List is designed to show resources arranged according to applications. The page gives you a good idea of how much of the device's memory

is being used by the applications (both in absolute and relative terms) as well as how much memory still remains. Check this page before adding an application.

The information is collected from the manifest (headers) - in other words, the size of a resource represents the size as it is declared by the application in question,

not necessarily the size of resources actually used by the application. The items of information include the following:

- hard disk

- memory

- thread

- socket

- file descriptor

You will not be able to install an application if the size of the remaining memory falls short of the size declared by the application. Moreover, the specifications

have been designed so that an application will not be able to start up if there is a shortage of memory for any of the foregoing items (i.e., memory, thread, socket,

file descriptor). To find out if there is enough memory, go through the following steps:

1) Log in to SMS.

2) Click Application List tab.

3) Check the displayed information:

a. Information on Applications

- Name (of the application)

- Installation (date)

- Application ID

- Status

- License

RLS authentication started

F-11-13