Outline - Canon imagePRESS C1 P Service Manual

16.1 Outline

16.1.1 Construction of Service Mode
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / imagePRESS C1+
The Service Mode screen is divided into three layers; initial screen, large/middle items, and small items, as shown below.
Each screen provides a mode used for regular maintenance (Level 1 mode) and a mode used for troubleshooting (Level 2 mode).
The initial screen of this machine displays the function names shown below.
(1) COPIER: Service mode for the main unit
(2) FEEDER: Service mode for the document feeder
(3) SORTER: Service mode for the finisher
(4) FAX: Service mode for the fax
(5) BOARD: Service mode for the optional board
Each of COPIER, FEEDER, SORTER, and BOARD has seven large items as shown below.
User screen
( )(2,8)( )
Reset key
Initial screen
(Level 1)
(Select an item.)
Main/intermediate
item screen
(Level 1)
(Select a main item from the top of screen.)
(The corresponding intermediate items are
then displayed and can be selected.)
Sub-item screen Sub-item screen
(Level 1) (Level 1)
Previous/next page
COPIER
FEEDER
SORTER
BOARD
Initial screen
( )(2) (Level 2)
(Select an item.)
Main/intermediate
item screen
(Level 2)
Sub-item screen
(Level 2)
F-16-1
DISPLAY status indication mode
I/O input/output indication mode
ADJUST adjustment mode
FUNCTION operation/inspection mode
OPTION settings mode
TEST test print mode
COUNTER counter mode
F-16-2
(Select a main item from the top of screen.)
(The corresponding intermediate items are
then displayed and can be selected.)
Sub-item screen
(Level 2)
Previous/next page
Chapter 16
0011-9614
16-1