Canon imagePRESS C1 P Service Manual page 918

Subheading
MEDIA-ZH
MEDIA-SK
MEDIA-TK
MEDIA-CS
MEDIA-EL
MEDIA-ES
MEDIA-ET
MEDIA-FI
MEDIA-HU
MEDIA-KO
MEDIA-NL
MEDIA-NO
MEDIA-PL
MEDIA-PT
MEDIA-RU
MEDIA-SL
MEDIA-SV
MEDIA-TW
MEDIA-BU
MEDIA-CR
MEDIA-RM
MEDIA-CA
2.ACC-STS
Subheading
SORTER
DECK
CARD
RAM
COINROBO
NIB
COPIER>DISPLAY>VERSION
Version of the simplified Chinese paper brand information
Version of the Slovakian paper brand information
Version of the Turkish paper brand information
Version of the Czechoslovakian paper brand information
Version of the Greek paper brand information
Version of the Spanish paper brand information
Version of the Esthonian paper brand information
Version of the Finnish paper brand information
Version of the Hungarian paper brand information
Version of the Korean paper brand information
Version of the Dutch paper brand information
Version of the Norwegian paper brand information
Version of the Polish paper brand information
Version of the Portuguese paper brand information
Version of the Russian paper brand information
Version of the Slovenian paper brand information
Version of the Swedish paper brand information
Version of the traditional Chinese paper brand information
Version of the Bulgarian paper brand information
Version of the Croatian paper brand information
Version of the Romanian paper brand information
Version of the Catalan paper brand information
COPIER>DISPLAY>ACC-STS
Display the connection status of the finisher and punch unit.
X: Connection status of the finisher
Y: Connection status of the punch unit
X:
0: Not connected, 1: Finisher, 2: Saddle finisher, 3: Saddle finisher + inserter, 4: Saddle finisher
+ paper folding unit, 5: Saddle finisher + inserter + paper folding unit, 6: 3K stacker, 7: Inner
finisher, 8: External small finisher
Y:
0: Not connected, 1: 2 holes, 2: 2/3 holes, 3: 4 holes (FRN), 4: 4 holes (SWDN)
Display the connection status of the paper deck.
0: Not connected
1: Connected (small)
2: POD deck light (with multi tray)
Display the connection status of the card reader.
0: A card reader is connected, but a card is not inserted.
1: A card reader is not connected. Or, a card reader is connected, and a card is inserted.
("1" is displayed when copy operation can be performed. "0" is displayed when copy operation
cannot be performed.)
Display the amount of memory installed in the main controller PCB.RAM:XX[MB]
Display the connection status of the coin vender.
0: Not connected
1: Connected
Display the connection status of the network board.
0: Not connected
1: Ethernet Board is connected.
2: Token Ring Board is connected.
3: Ethernet Board and Token Ring Board are connected.
Contents
T-16-23
Contents
Chapter 16
Level
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Level
1
1
1
1
1
1
16-21