Canon imagePRESS C1 P Service Manual page 182

Chapter 2
[2]
30) Attach the reader right cover [1].
In the case of installing the DADF-R1 simultaneously, be sure to attach the
cover duct packaged with the DADF-R1 to the reader right cover in
advance.
- 3 screws (RS tighten; M4X8) [2]
[1]
31) Attach the sub station upper rear cover [1] and filter [2], which are re-
moved in the step 8.
- 6 screws [3]
When tighten the 2 upper screws, tighten the screws while pushing the
upper rear cover in the direction of the arrow.
2-88
[1]
F-2-331
[2]
F-2-332
[3] [2]
[3]
[1]
32) Put the upper rear face cover 3 detached in step 8 into the hole found at
the sub station upper rear cover.
33) Fix the upper rear face cover 3.
<With ADF>
- 2 screws [1]
[1]
<With Platen Cover >
- 1 screw [1]
[1]
34) Only with the copy board cover, attach the upper rear face cover 1 [1].
- 1 screw [2]
[3]
[3]
F-2-333
F-2-334
F-2-335